SD-Karte Clonen

unter UNIX kann sehr effizient das Tool ‚dd‘ verwendet werden.

Die man-Page des Befehls gibt Aufschluss auf die einzelnen Parameter.

NAME
       dd - convert and copy a file

SYNOPSIS
       dd [OPERAND]...
       dd OPTION

DESCRIPTION
       Copy a file, converting and formatting according to the operands.

       bs=BYTES
              read and write up to BYTES bytes at a time

       cbs=BYTES
              convert BYTES bytes at a time

       conv=CONVS
              convert the file as per the comma separated symbol list

       count=N
              copy only N input blocks

       ibs=BYTES
              read up to BYTES bytes at a time (default: 512)

       if=FILE
              read from FILE instead of stdin

       iflag=FLAGS
              read as per the comma separated symbol list

       obs=BYTES
              write BYTES bytes at a time (default: 512)

       of=FILE
              write to FILE instead of stdout

       oflag=FLAGS
              write as per the comma separated symbol list

       seek=N skip N obs-sized blocks at start of output

       skip=N skip N ibs-sized blocks at start of input
status=LEVEL
              The  LEVEL  of information to print to stderr; 'none' suppresses
              everything but error messages,  'noxfer'  suppresses  the  final
              transfer  statistics, 'progress' shows periodic transfer statistics

       N and BYTES may be followed by the following multiplicative suffixes: c
       =1, w =2, b =512, kB =1000, K =1024, MB =1000*1000, M =1024*1024, xM =M
       GB =1000*1000*1000, G =1024*1024*1024, and so on for T, P, E, Z, Y.

       Each CONV symbol may be:

       ascii  from EBCDIC to ASCII

       ebcdic from ASCII to EBCDIC

       ibm    from ASCII to alternate EBCDIC

       block  pad newline-terminated records with spaces to cbs-size

       unblock
              replace trailing spaces in cbs-size records with newline

       lcase  change upper case to lower case

       ucase  change lower case to upper case

       sparse try to seek rather than write the output for NUL input blocks

       swab   swap every pair of input bytes

       sync   pad every input block with NULs  to  ibs-size;  when  used  with
              block or unblock, pad with spaces rather than NULs

       excl   fail if the output file already exists

       nocreat
              do not create the output file

       notrunc
              do not truncate the output file

       noerror
              continue after read errors

       fdatasync
              physically write output file data before finishing

       fsync  likewise, but also write metadata

       Each FLAG symbol may be:

       append append  mode  (makes  sense  only  for output; conv=notrunc suggested)

       direct use direct I/O for data

       directory
              fail unless a directory

       dsync  use synchronized I/O for data

       sync   likewise, but also for metadata

       fullblock
              accumulate full blocks of input (iflag only)

       nonblock
              use non-blocking I/O

       noatime
              do not update access time

       nocache
              Request to drop cache.  See also oflag=sync

       noctty do not assign controlling terminal from file

       nofollow
              do not follow symlinks

       count_bytes
              treat 'count=N' as a byte count (iflag only)

       skip_bytes
              treat 'skip=N' as a byte count (iflag only)

       seek_bytes
              treat 'seek=N' as a byte count (oflag only)

       Sending a USR1 signal to a running 'dd' process makes it print I/O statistics to standard error and then resume copying.

       Options are:

       --help display this help and exit

       --version
              output version information and exit

AUTHOR
       Written by Paul Rubin, David MacKenzie, and Stuart Kemp.

REPORTING BUGS
       GNU coreutils online help: <http://www.gnu.org/software/coreutils/>
       Report dd translation bugs to <http://translationproject.org/team/>

COPYRIGHT
       Copyright  ©  2016  Free Software Foundation, Inc.  License GPLv3+: GNU
       GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
       This is free software: you are free  to  change  and  redistribute  it.
       There is NO WARRANTY, to the extent permitted by law.

SEE ALSO
       Full documentation at: <http://www.gnu.org/software/coreutils/dd>
       or available locally via: info '(coreutils) dd invocation'

Hier nun die Schritte die ganz einfach ein Image der SD-Karte erzeugen. Anschließend kopiere ich das Image auf eine andere SD-Karte.

1. Insert the micro SD card via the card reader.
2. Open the Disks app.
3. Quick format the whole card (not a specific partition).
4. Close Disks.
5. Open terminal and execute:

sudo fdisk -l

Relevante Ausgabe (die zeigte, dass aufgrund der schnellen Formatierung der gesamten Karte keine Partitionen vorhanden waren):

Disk /dev/sdb: 7.4 GiB, 7948206080 bytes, 15523840 sectors 
Units: sectors of 1 * 512 = 512 bytes 
Sector size (logical/physical): 512 bytes / 512 bytes 
I/O size (minimum/optimal): 512 bytes / 512 bytes 
Disklabel type: dos 
Disk identifier: 0x6957f2f2

sudo dd if=~/raspberrypi2.img of=/dev/sdb

Dieser Schritt dauert ein paar gute Minuten (auch bei USB3). Achten Sie darauf, ihn nicht durch einen Vorgang zu unterbrechen, der das Mounten aufruft (Öffnen der Apps Files oder Disks).

Danach meldet sich das Shellfenster mit einem blinkenden Prompt wieder zurück. Leider unterstützt der Befahl ‚dd‘ keine Statusinformation.

Ich hoffe ich konnte mit meinem Beitrag bei eurem Problem weiterhelfen.